1st ride and problems
Finally got my 1st ride of '10 in today, we still have snow on the ground, but it got to almost 50 so I had to ride, not much, but I still managed just over 100 miles. It didn't go off without a hitch though. I've been keeping my '06 1200 on a tender, start it regularly, never any problems unless it's extremely cold. I fired it up today, no problems, got it warmed up and took off, noticed immediately that the speedo wasn't working, nice day, screw it, I'm riding. The odometer isn't working either, push the button on the back and can't get to trip meter A or B and the odo isn't registering any miles traveled, but it will display the total miles when you push the button, then it shows nothing, just a blank display. The running lights up front work, but the turn signals do not work at all, the horn doesn't work either. I should add that when I turn the key on and wait for diagnostics to run, they don't, but the turn signals flash 6 times rapidly. Everything worked fine last time I rode it last December, it starts and runs just fine, any ideas?
__________________
 06 XL1200C
|